# makerworld

> bambulab.com | Storage; 1 record: free tier, limits, identity cost and evidence.

HTML https://fshy.ajam.dev/p/bambulab/ | JSON https://fshy.ajam.dev/api/v1/entity/bambulab.json | how to read a record: https://fshy.ajam.dev/llms-full.txt

## makerworld (bambu lab)

- `storage/makerworld` | fails-quota | evidence reported | binding none | category rejected-provider
- identity a placeholder: card and phone unknown | verified 2026-10-21 (inherited) | stale on 2026-11-05
- url https://forum.bambulab.com/t/max-raw-model-and-print-profile-file-size-limit-too-low/64114
- free tier: Model files capped around 250-500 MB total per design and 150-200 MB per print profile; 3MF/STL pipeline only. | unit: none | metered on: none | read on: 2026-10-21 | source: [1]
- per-object cap: not recorded | source: [1] | note: not recorded
- retention: not recorded | source: [1]
- egress: not recorded | metered: no
- identity: email
- interface: unknown
- tooling: not recorded
- composes with: the same as tooling
- reliability: the same as the free tier
- notes: the same as the free tier
- extras:
  - dead_end.failure_class: quota
  - dead_end.why: Model files capped around 250-500 MB total per design and 150-200 MB per print profile; 3MF/STL pipeline only.
  - dead_end.first_recorded: 2026-10-21
- evidence:
  - [1] 2026-10-21: Model files capped around 250-500 MB total per design and 150-200 MB per print profile; 3MF/STL pipeline only.
  - [2] 2026-10-21: cited as the basis of the rejection: Model files capped around 250-500 MB total per design and 150-200 MB per print profile; 3MF/STL pipeline only.
- sources:
  - [1] https://forum.bambulab.com/t/max-raw-model-and-print-profile-file-size-limit-too-low/64114
  - [2] https://omnvert.com/en/tools/stl-reducer/for/makerworld